Pyrex brand extraction apparatus with Allihn condenser, condenser only from Sigma-Aldrich
Description:This is a PYREX replacement Allihn condenser with a 34/45 inner joint on the bottom for the No. CLS3840-S 125mL extractor system. The tubulation O.D. on the condenser is 10mm....Pyrex brand 5mm diameter NMR tubes from Sigma-Aldrich
Description:These precision 5mm diameter, 7 inch long PYREX NMR tubes are made from quality borosilicate glass for compatibility with ground joints, valves, and vacuum racks. They are designed for use on NMR spectrometers running from 300 to 500MHz. They have an O.D. of 4.97 + 0.000-0.013mm and an I.D. of 4.20 + 0.013-0.000mm. These NMR tubes can be used with the PYREX Microcell system (No. CLS9984) to avoid...Pyrex brand Fernback baffledculture flask with beaded neck from Sigma-Aldrich
Description:This 2800mL wide mouth PYREX Fernbach-style culture flask is designed for culturing organisms requiring a large surface area to volume ratio. It can also be used in serum production. Triple baffled on the bottom outside edges to achieve maximal oxygen transfer to culture medium. Beaded neck rim is approximately 63mm I.D. and accepts cotton plugs or No. 13 rubber stoppers. This flask has a large m...Pyrex brand Fernback baffled culture flask from Sigma-Aldrich
Description:These 2800mL wide mouth PYREX Fernbach-style culture flasks have triple baffles located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. These triple baffled flasks have a Delong-style 38mm neck for use with plastic or stainless steel closures. For plastic closures see Nos. CLS2679638 or CLS2679738. These flasks have a large marking spot....Pyrex brand Fernback baffled culture flask, with screw cap from Sigma-Aldrich
Description:These 2800mL PYREX Fernbach-style culture flasks have triple baffles located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. These flasks have a large marking spot. A wide range of optional caps are available for these bottles including: Vented membrane cap with 0.22m PTFE...Pyrex brand baffled trypsinizing flask, with beaded neck from Sigma-Aldrich
Description:These 1.5L PYREX trypsinizing flasks are used for converting homogenous tissue samples into cell suspensions by digestion of connective proteins. Heavy beaded neck accepts cotton plugs. Four extra-deep baffles enhance vigorous agitation. • Height of Baffles mm : 125...Pyrex brand low form culture flask from Sigma-Aldrich
Description:This 2500ml narrow mouth PYREX low form culture flask is designed for culturing organisms requiring a large surface area to volume ratio. This flask has a heavy beaded rim to protect against chipping and include a large marking spot. The neck O.D. is 38mm and takes a No. 6.5 rubber stopper. • Note: Do not use this flask on a heat source smaller than the base of the flask. Uneven heating o...Pyrex brand low actinic narrow mouth Erlenmeyer flask, Pyrex ST 27 stopper from Sigma-Aldrich
Description:capacity 250 mL...Pyrex brand narrow mouth graduated erlenmeyer flask, student grade from Sigma-Aldrich
Description:Narrow-mouth has heavy-duty rim. Approximate graduations are in durable white enamel. Extra large marking space. Special grade: student grade...Pyrex brand narrow-mouth graduated erlenmeyer flask from Sigma-Aldrich
Description:A convenience pack containing one each of the most popular sizes of Cat. No. 4980 flask. Designed for the low volume user, a case contains one each of five sizes: 50mL, 125mL, 250mL, 500mL, and 1L. assortment pack...Pyrex brand narrow mouth graduated erlenmeyer flask, student grade from Sigma-Aldrich
Description:Heavy-duty rim. Especially recommended as a titration flask. Corning5100. Special grade: student grade...Pyrex brand shaker flask with extra-deep baffles from Sigma-Aldrich
Description:These 50ml PYREX Delong style shaker flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is designed for two-position polypropylene closures. Their uniform wall thickness provides the proper balance between mechanical strength and thermal shock...