Detect Single Nucleotide Sequence Changes with Mx4000 Molecular Beacon Allelic Discrimination Kits
...of contamination asthe test is performed in closed tubes and requires no post-PCR manipulation ofsamples. ...es. Second, because the test isperformed in closed tubes and no post-PCR manipulation of samples is required,the risk of PCR product carry-over contamination...Effects of Thermal Cycler Well-To-Well Temperature Uniformity on PCR Results
..., fluid temperature measurements were taken in six tubes positioned in the four corner wells and tw... were inserted into six, 200-l thin-walled tubes containing 50 l of 1X Taq DNA polymerase buffer and cycled through three cycles of 95C for 1...Brilliant Core Reagent Kits for QPCR and QRT-PCR
...eactions were performedin 200-l thin-wall reaction tubes in a 10-l reaction volume with StratagenesRoboCycl...irst-strand synthesis reaction was added tooptical tubes containing 1X Brilliant Plus QPCR core buffer; the optimalconcentration of MgCl 2 ; 200 M each of dG...New Temperature Cycler Features Interchangeable Blocks
.... 1 Using a robotic arm, the RoboCycler unit moves tubes from one preset hot blockto another, avoiding the ...s were added to six thin-walled tubes. The tubes were positioned in the four corner wells and two center wells of the 40-well paddle of the H...Novel PCR Enhancing Factor Improves Performance of Pfu DNA Polymerase
...cations were aliquoted into 200-l, thin-walled PCR tubes andcycled using a RoboCycler Gradient 96 temperature cycler # fitted with a Hot Top Assembly. The amplified reaction products wereelectrophoresed through 1% agarose gels in 1X TBE for 60 minutes at 75 V,stained with ethidium bromide and imaged us...Oil-Free PCR Using the Hot Top Assembly
...nd arobotic arm that moves a paddle containing PCR tubes from block to block atuser-specified times. The st...units fitted with Hot Top Assemblies heat reaction tubes from thetop and sides as well as the bottom. This uniform heating dramatically reducesthe amount of ...Efficiently Insert Unique Restriction Sites into Plasmid Vectors
...in-resistant colonies were inoculated into tubes containing 1.5 ml of LB media and 100 g/ml of ampicillin and incubated with shaking for 12 hours at 37C. Plasmid DNA was purified from the cultures using the StrataPrep plasmid miniprep kit. 3 Plasmid preparations were dige...A Simple and Rapid Technique to Purify High-Quality Midiprep DNA
...in used. Pre-qualified pyrogen-free 50-ml conical tubes are also available for thepreparation of endotoxin-free DNA for sensitive experiments. New plasticware isalso considered endotoxin-free. Conclusions Use the fast, easy StrataPrep EF plasmid midiprep kit to isolate high-purityendotoxin-free plasmid ...Easily Amplify Genomic DNA with Long-Distance PCR
...r clipswere transferred into 1.5-l microcentrifuge tubes containing 150 l ofdigestion solution (50 mM Tris-...0 mM EDTA, 0.1% SDS, and 1 mg/mlproteinase K). The tubes were incubated overnight at 55C on a rotatingplatform. Genomic DNA was precipitated by adding 50 l o...... Broth) and 2X YT and cultivated in membrane-lid tubes (Eppendorf LidBac 2.0 ml tube; 1.5 ml culture) and in 15 ml conical tubes (1.5 ml culture) with the aforementioned media. 36 Experiments were carried out in ...A membrane-lid tube for bacteria cultivation and freeze-drying
...ivation, as required when conventional glass tubes are used, is no longer necessary. ... each was transferred to 1.5 ml membrane-lid tubes (Eppendorf Lid Bac )and 5 ml each was transferred to a 50 ml Erlenmeyer flask with cellulose s......ransferred into the appropriate micro test tubes for further processing. Advantages This process can be used for cloning and isolating microorganisms (such as bacteria, archaea, protozoa and fungi) as well as eukaryotic ...Restriction Digests of DNA Isolated with the Perfectprep Gel Cleanup Kit
...action tube. The lids were closed, and the tubes were briefly centrifuged to add the master mix to the DNA samples so that all of the reactions began at the same time. All reactions were incubated at 37C for 2 hours. The reactions were stopped by adding 2.5 l of 10x Gel Load...An Assessment of the Eppendorf twin.tec plate performance in PCR* applications
... thinner than the conventional thin-walled tubes and plates, and this translates into more efficient heat transfer to the sample as evidenced in the results. In this article, we have made a comparative assessment on the performance of the Eppendorf 96-well twin.tec plate with...Chemical Stability of Disposables
...ks reveals that disposables, e.g. micro test tubes of the same type, can react differently with the s...ltimate in safety by using the disposable tips and tubes once only. For each chemical, two figures are stated (X/X). The first figure (left) i......2 ml PCR tubes. - Ensure that the 0.2 ml PCR tubes fit exactly into the thermal block of the cycler. Eppendorf 0.2 ml PCR tubes are recommended for the Eppendorf Mastercycler. - Always prepare two master mixes and ch...Efficient Transfection of Neurospora Crassa
...40 µl aliquots to two Eppendorf 2 ml tubes on ice. In Tube #1, 1 µg of supercoiled DNA ...M EDTA, pH 8) was added for control purposes. Both tubes were left on ice, while chilling two 2 mm Eppendorf electroporation cuvettes. The Ep...Lambda DNA Extraction Protocol
... lgt10 DNA per 450 l of supernatant processed. PLG tubes also can be used in conjunction with other LambdaDNA purification methods. (1) Grow a 10 ml stock of suitable plating bacteria in L-broth plus Mg2+ (1% Tryptone, 0.5% yeast extract, 0.5% NaCl, 1 mM MgSO4, pH 7....Genomic DNA Extraction from Buffy Coat Using the Perfect gDNA Blood Mini Kit
...ial of blood: The term vial refers to the tubes typically used for collection of the blood. Vacutainer (Becton Dickinson, USA) is an example of this type of vial. These vials are usually glass and may hold various amounts of blood with 1.5 ml being the minimum amount requir...Basic Plasmid DNA Isolation Protocol
...phases to fresh pre-spun PLG 50 ml Heavy tubes and repeat step 7 above. Recover resulta... Recover resultant aqueous phases to suitable tubes and process or precipitate the samples as per your protocols and procedures. ...Protocol for RNA Isolation Using TRIzol Reagent with Phase Lock Gel-Heavy
...re-spin the appropriate sized Phase Lock Gel-Heavy tubes briefly to collect gel on tube bottoms (... at tube bottoms). Add cell lysate to the tubes containing pre-spun Phase Lock Gel-Heavy and incubate 5 minutes at 1530C. Add 0.......2 ml PCR tubes. - Ensure that the 0.2 ml PCR tubes fit exactly into the thermal block of the cycler. Eppendorf 0.2 ml PCR tubes are recommended for the Eppendorf Mastercycler. - Always prepare two master mixes and ch...Efficient Transfection of Neurospora Crassa
...40 µl aliquots to two Eppendorf 2 ml tubes on ice. In Tube #1, 1 µg of supercoiled DNA ...M EDTA, pH 8) was added for control purposes. Both tubes were left on ice, while chilling two 2 mm Eppendorf electroporation cuvettes. The Ep...Lambda DNA Extraction Protocol
... lgt10 DNA per 450 l of supernatant processed. PLG tubes also can be used in conjunction with other LambdaDNA purification methods. (1) Grow a 10 ml stock of suitable plating bacteria in L-broth plus Mg2+ (1% Tryptone, 0.5% yeast extract, 0.5% NaCl, 1 mM MgSO4, pH 7....Genomic DNA Extraction from Buffy Coat Using the Perfect gDNA Blood Mini Kit
...ial of blood: The term vial refers to the tubes typically used for collection of the blood. Vacutainer (Becton Dickinson, USA) is an example of this type of vial. These vials are usually glass and may hold various amounts of blood with 1.5 ml being the minimum amount requir...Basic Plasmid DNA Isolation Protocol
...phases to fresh pre-spun PLG 50 ml Heavy tubes and repeat step 7 above. Recover resulta... Recover resultant aqueous phases to suitable tubes and process or precipitate the samples as per your protocols and procedures. ...Protocol for RNA Isolation Using TRIzol Reagent with Phase Lock Gel-Heavy
...re-spin the appropriate sized Phase Lock Gel-Heavy tubes briefly to collect gel on tube bottoms (... at tube bottoms). Add cell lysate to the tubes containing pre-spun Phase Lock Gel-Heavy and incubate 5 minutes at 1530C. Add 0....Ergonomics and Liquid Handling How can BrinkmannTM Help ?
...tacles, no higher than the height of the tubes that you are using Other articles have been written that detail even more suggestions that should be followed (Haskell, 1998), which include: Use electronic pipettes, which are programmable and reduce the need ...Brinkmann/Eppendorf SOP Standard Operating Procedure for Pipettes
...act with the pipettes must be prevented. The tubes provided by Eppendorf and the moisture trap with lid are made of glass, which minimizes electrostatic charge. Measuring station: Calibration software and accessories for your balance (PICASO, catalog no.: 22 44 501-4...Decontamination and inhibition of ribonucleases
...when possible. Eppendorf Biopur tips and tubes provide this quality feature in addition to being DNase free. Metal tools like spatulas can quickly be decontaminated by holding in a burner flame for several seconds. Contaminating RNases on glassware can be inactivated ...Isolation of Cosmids using Eppendorf's Perfectprep Plasmid Mini Kit
... mg/ml. The cultures were placed in 14 ml snap cap tubes and allowed to grow at 300 rpm and 37C for 1416 hours, optimal growth will give OD 600 readings of an 1.52.0. Purification Cells were harvested at 4000 rpms for 6 minutes at room temperature in a 58...Easy preparation of total RNA from cultured cells with TRIzol and Eppendorf Phase Lock Gel
... Aliquot lysate into five 2 ml PLG Heavy tubes and five 2 ml standard tubes without PLG (300 ml each). Add 60 l of chloroform/isoamyl alcohol (in a ratio of 49:1, ...... 1 mM ice-cold sucrose-citrate buffer, dispense in tubes and incubate for 3.5 hours at 4 C. Electroporation of cells: Add 0.5-1.5 g plasmid DNA to 80 l of electrocompetent cells. Homogenize by gently mixing with pipette sev...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the de...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the dev...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the d...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the d...... 1 mM ice-cold sucrose-citrate buffer, dispense in tubes and incubate for 3.5 hours at 4 C. Electroporation of cells: Add 0.5-1.5 g plasmid DNA to 80 l of electrocompetent cells. Homogenize by gently mixing with pipette sev...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the de...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the d...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the dev...... Add 1 l DNA (10 pg in water) to tubes containing 40 l electrocompetent cells. Homogenize by gently mixing with pipette several times. Transfer mixture to a prechilled cuvette. Wipe moisture from the cuvette and insert the cuvette into the d...Single-cell RT-PCR Analysis of Paramecium Primaurelia with the Eppendorf cMaster RTplusPCR System
...he reactions were prepared directly in the tubes in which the poly-A-RNA had been fixed. The RNA template is therefore missing in the protocols. Three different primer pairs were used: Serotype G: Product app. 800 bp Serotype D: Product app. 500 bp Control pr...The use of TaqMaster PCR Enhancer
...-575 (6) PCR reaction mix for ten tubes consists of: Rxn. with enhancer: 25 l 10x Buffer 50 l TaqMaster PCR Enhancer 20 l dNTP at 2.5 M 2.5 l Primer 1 at 1 g/l 2.5 l Primer 2 at 1 g/l 130 l H O +2 l Tail DNA (out of 200 l tota...Simple and Rapid Isolation of Plant RNA Using the Eppendorf Perfect RNA, Eukaryotic, Maxi Kit
...erfect RNA Maxi Spin Columns into 50 ml centrifuge tubes and transfer lysate/Binding Matrix mixtu...ransfer Spin Columns to fresh centrifuge tubes without splashing Wash Solution I. Add 10 ml Diluted Wash Solution II (ethanol not provide...The use of the Mastercycler gradient for single-cell PCR and preimplantation diagnosis
...g2+-free medium and transferred to 200 l PCR tubes (Eppendorf PCR tubes) containing 2.5 or 5 l ...nds. The tubes were kept at -80 C before being processed further. The cells were lysed by incubating them at ...BioRobot MDx standardize your automated protocols in clinical laboratories
... buffer volumes are sufficient for the run. Sample tubes and tube holders are labeled with bar codes,... access to the worktable, and primary sample tubes are covered during processing. These features reduce the users exposure to potentially infecti...... dispense appropriate volumes into PCR tubes or plates. Mix gently, for example by.../50 l reaction)) to the individual PCR tubes containing the reaction mix. For multiplex RT-PCR, the volume of cDNA added...... down a few times. It is not necessary to keep PCR tubes on ice as nonspecific DNA synthesis ca...(<=1 g/reaction) to the individual tubes containing the master mix. For RT-PCR, add an aliquot from the reverse transcriptase rea...Fully automated DNA purification and efficient multiplex PCR for analysis of microsatellite loci
...hy donors in spray-dried K-EDTA collection tubes and were stored at 28C until preparation. Genomic and mitochondrial DNA was purified from 200 l whole blood using the QIAamp DNA Blood BioRobot MDx Kit. The BioRobot MDx workstation required 2.5 hours (including a load check o...RNeasy Mini, Midi, and Maxi Kits
...olumns with 1.5 ml and 2 ml collection tubes Midi columns with 15 ml collection tubes Maxi columns with 50 ml collection tubes Sample size ...Critical factors for successful microarray and real-time PCR analyses
... Reagent in easy-to-handle, reclosable tubes for immediate RNA stabilization at sample collection. This is especially important in fields such as molecular diagnostics, in order to immediately stabilize biopsies and other tissue samples directly after excisio...Ni-NTA Superflow Columns - automated large-scale purification of 6xHis-tagged proteins
...fugation. Cleared lysates are transferred to 14 ml tubes and placed with the relevant number of Ni-NTA Superflow Columns on the BioRobot worktable for processing. The automated procedure then begins. After column equilibration, the BioRobot 3000 workstation p...RNeasy Protect Mini, Midi, and Maxi Kits
...olumns with 1.5 ml and 2 ml collection tubes Midi columns with 15 ml collection tubes Maxi columns with 50 ml collection tubes Sample size ...TransMessenger Transfection Reagent Handbook
...ace of the skin. Change gloves frequently and keep tubes closed. Ensure that all glassware, plasticwa...are The use of sterile, disposable, plastic tubes throughout the procedure is recommended. These tubes are generally RNase-free and do not requi...Transfection Reagent Selector Kit Handbook
... Label twenty-two 1.5-ml microfuge tubes 111 for Effectene Reagent and 1222 for S... Label six 1.5-ml microfuge tubes AF for mastermix preparation: AC for DNA-Enhancer mastermix preparation for Effectene Reag...Enhancing Ruggedness and Full-Scan MS Sensitivity Using Ion Sweep Technology
... Sweep cap through the openings of the three tubes positioned in front of the ion transfer tube orifice. The flow of nitrogen gas over the opening of the ion transfer tube ensures that the ions pierce this gentle stream of nitrogen gas as they travel into the ion transfer tube. Solv...Titan One Tube RT-PCR System / Kit
...ates was captured in streptavidin-coated PCR tubes using the mRNA Capture Kit. RT-PCR was performed with the Titan System (RT at 50C) or RNase H - M-MuLV reverse transcriptase from Supplier L (RT at 42C) +Taq DNA polymerase according to each suppliers protocol. The Titan System...... Autoclaving solutions, tips, and tubes Aliquoting reagents to minimiz... DNA, irradiate in clear 0.5 ml polypropylene tubes in direct contact with glass transilluminator (254 and 300 nm UV bulbs) for 5 minutes ......- Post-PCR analysis. Use thin-walled PCR tubes which are DNase and RNase free. Use special aerosol-resistant pipette tips, and a dedicated (used only for PCR) set of pipettes, preferably positive displacement pipettes. If possible, set up PCR reactions under a fume h...