Navigation Links
Reportlinker Adds U.K. Market for Dental Prosthetics and CAD/CAM Devices 2011
Date:3/14/2011

NEW YORK, March 14, 2011 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

U.K. Market for Dental Prosthetics and CAD/CAM Devices 2011

http://www.reportlinker.com/p0164120/UK-Market-for-Dental-Prosthetics-and-CAD/CAM-Devices-2011.html

The U.K. market for dental prosthetics was the third largest dental prosthetics market in Europe in 2010. As a result of the growing number of private practices in the U.K. and the high cost of dental procedures, patients are engaging in dental tourism to countries that offer dental services and restorations at lower costs. The dental prosthetics market in the U.K. experienced an overall slow down due to NHS policy changes in reimbursement for dental prosthetics.

This report also includes the following market segments:

- Crown and Bridge Market

- Denture Market

- CAD/CAM System Market

- CAD/CAM Block and Prosthetic Market

The aging population and demand for superior dental aesthetics are driving the prosthetics market. The global economic recession of 2008 and 2009 resulted in a slowdown in total market growth; however, the market began to recover in 2010 and is expected to experience accelerating growth by 2017. CAD/CAM manufactured prosthetics are expected to represent the fastest growing segment while the CAD/CAM system market will exhibit high unit growth rates over the forecast period.

This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

TABLE OF CONTENTS

TABLE OF CONTENTS.I

LIST OF FIGURES. IV

LIST OF CHARTS VI

EXECUTIVE SUMMARY. 1

1.1 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS 1

1.2 CAD/CAM PROSTHETICS MARKETS 2

1.3 DENTAL STATISTICS . 3

1.4 TREND ANALYSIS BY COUNTRY. 4

1.5 TREND ANALYSIS BY SEGMENT . 5

1.6 CROWN AND BRIDGE MARKET. 6

1.7 DENTURE MARKET . 7

1.8 CAD/CAM SYSTEM MARKET 8

1.9 FULL IN-LAB CAD/CAMSYSTEMS. 9

1.10 STANDALONE SCANNER MARKET 10

1.11 CHAIRSIDE SYSTEM MARKET. 11

1.12 COMPETITIVE ANALYSIS 12

RESEARCH METHODOLOGY. 13

2.1 RESEARCH SCOPE . 13

2.2 IDATA'S 9-STEP METHODOLOGY . 13

Step 1: Project Initiation & Team Selection . 14

Step 2: Prepare Data Systems and Perform Secondary Research 15

Step 3: Preparation for Interviews & Questionnaire Design . 16

Step 4: Performing Primary Research 17

Step 5: Research Analysis: Establishing Baseline Estimates . 19

Step 6: Market Forecast and Analysis 19

Step 7: Identify Strategic Opportunities . 21

Step 8: Final Review and Market Release 22

Step 9: Customer Feedback and Market Monitoring 23

U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS 24

3.1 INTRODUCTION . 24

3.2 MARKET ANALYSIS AND FORECAST 25

3.2.1 Total Dental Prosthetics Market. 25

3.2.2 Crown and Bridge Market 30

3.2.2.1 Porcelain-Fused Metal Market 37

3.2.2.2 Full-Cast Market .39

3.2.2.3 All-Ceramic Market .41

3.2.3 CAD/CAM Prosthetics Market . 43

3.2.3.1 Chairside CAD/CAM Prosthetics Market 45

3.2.3.2 In-Lab CAD/CAM Prosthetics Market 47

3.2.4 Denture Market. 49

3.2.4.1 Full Denture Market 53

3.2.4.2 Partial Denture Market .53

3.2.5 CAD/CAM System Market 55

3.2.5.1 Full In-Lab CAD/CAM System Market 57

3.2.5.2 Standalone Scanner Market. 60

3.2.5.3 Chairside System Market. 64

3.3 MARKET DRIVERS AND LIMITERS 68

3.3.1 Total Dental Prosthetics Market. 68

3.3.1.1 Market Drivers. 68

3.3.1.2 Market Limiters .69

3.3.2 Crown and Bridge Market 70

3.3.2.1 Market Drivers. 70

3.3.2.2 Market Limiters .72

3.3.3 Denture Market. 74

3.3.3.1 Market Drivers. 74

3.3.3.2 Market Limiters .74

3.3.4 CAD/CAM System Market 75

3.3.4.1 Market Drivers. 75

3.3.4.2 Market Limiters .76

Technological Limitations .76

3.4 COMPETITIVE ANALYSIS 78

3.4.1 CAD/CAM Systems . 78

3.4.1.1 Full In-Lab Systems .82

3.4.1.2 Standalone Scanners 84

3.4.1.3 Chairside Systems 86

ABBREVIATIONS 87

LIST OF FIGURES

EXECUTIVE SUMMARY 1

RESEARCH METHODOLOGY 13

U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS . 24

Figure 3-1: Dental Prosthetics Market, U.K., 2007 – 2017 (euro) . 27

Figure 3-2: Dental Prosthetics Market, U.K., 2007 – 2017 (US$). 28

Figure 3-3: Crown and Bridge Market, U.K., 2007 – 2017 (euro) . 31

Figure 3-4: Crown and Bridge Market, U.K., 2007 – 2017 (US$). 31

Figure 3-5: Crown and Bridge Units by Material Type, U.K., 2007 – 2017 33

Figure 3-6: Porcelain-Fused Metal Device Market, U.K., 2007 – 2017 (euro) . 38

Figure 3-7: Porcelain-Fused Metal Device Market, U.K., 2007 – 2017 (US$) 38

Figure 3-8: Full-Cast Device Market, U.K., 2007 – 2017 (euro) . 40

Figure 3-9: Full-Cast Device Market, U.K., 2007 – 2017 (US$). 40

Figure 3-10 All-Ceramic Device Market, U.K., 2007 – 2017 (euro) 42

Figure 3-11: All-Ceramic Device Market, U.K., 2007 – 2017 (US$) 42

Figure 3-12 CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (euro) . 44

Figure 3-13: CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$) 44

Figure 3-14: Chairside CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (euro) . 46

Figure 3-15: Chairside CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$) 46

Figure 3-16: In-Lab CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (euro) . 48

Figure 3-17: In-Lab CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$). 48

Figure 3-18: Denture Units by Type, U.K., 2007 – 2017 50

Figure 3-19: Denture Market, U.K., 2007 – 2017 (euro) . 50

Figure 3-20: Denture Market, U.K., 2007 – 2017 (US$) 51

Figure 3-21: Denture Market Segmented by Type, U.K., 2007 – 2017 54

Figure 3-22: CAD/CAM System Market, U.K., 2007 – 2017 (euro, US$) 55

Figure 3-23: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (euro) 57

Figure 3-24: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (US$) . 58

Figure 3-25: Standalone Scanner Market, U.K., 2007 – 2017 (euro) . 62

Figure 3-26: Standalone Scanner Market, U.K., 2007 – 2017 (US$). 62

Figure 3-27: Chairside System Market, U.K., 2007 – 2017 (euro). 65

Figure 3-28: Chairside System Market, U.K., 2007 – 2017 (US$) 66

Figure 3-29: Market Drivers and Limiters, Dental Prosthetics Market, U.K., 201070

Figure 3-30: Market Drivers and Limiters, Crown and Bridge Market, U.K., 201073

Figure 3-31: Market Drivers and Limiters, Denture Market, U.K., 2010 75

Figure 3-32: Market Drivers and Limiters, CAD/CAM Systems Market, U.K.,

2010 76

Figure 3-33: Leading Competitors, CAD/CAM System Market, U.K., 2010 . 80

Figure 3-34: Leading Competitors, Full In-Lab CAD/CAM System Market, U.K.,

2010 83

Figure 3-35: Leading Competitors, Standalone Scanner System Market, U.K.,

2010 85

ABBREVIATIONS 87

LIST OF CHARTS

EXECUTIVE SUMMARY 1

Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (euro M) 1

Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology

versus Conventional Methods, Europe, 2007 – 2017 . 2

Chart 1-3: Population per Dentist by Country, Europe, 2010 . 3

Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010 4

Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market,

Europe, 2007 – 2017 5

Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (euro M) 6

Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017 . 7

Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (euro M) 8

Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (euro M) . 9

Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017. 10

Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017 11

Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010 . 12

RESEARCH METHODOLOGY 13

U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS . 24

Chart 3-1: Dental Prosthetics Market, U.K., 2007 – 2017 (euro M) 29

Chart 3-2: Crown and Bridge Market, U.K., 2007 – 2017 (euro M) 32

Chart 3-3: Crowns and Bridge Units by Material Type, U.K., 2010 . 34

Chart 3-4: Crown and Bridge Units by Material Type, U.K., 2017 . 35

Chart 3-5: Crown and Bridge Units by Material Type, U.K., 2007 – 2017 . 36

Chart 3-6: Denture Market, U.K., 2007 – 2017 (euro M) . 52

Chart 3-7: CAD/CAM System Market, U.K., 2007 – 2017 (euro M) 56

Chart 3-8: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (euro M) . 59

Chart 3-9: Standalone Scanner Market, U.K., 2007 – 2017 (euro M) 63

Chart 3-10: Chairside Systems Market, U.K., 2007 – 2017 (euro M) . 67

Chart 3-11: Leading Competitors, CAD/CAM System Market, U.K., 2010. 81

Chart 3-12: Leading Competitors, Full In-Lab CAD/CAM System Market, U.K.,

2010 83

Chart 3-13: Leading Competitors, Standalone Scanner System Market, U.K.,

2010 85

ABBREVIATIONS 87

To order this report:

Dental Equipment Industry: U.K. Market for Dental Prosthetics and CAD/CAM Devices 2011

Dental Equipment Business News

More  Market Research Report

Check our  Company Profile, SWOT and Revenue Analysis!

Nicolas Bombourg

Reportlinker

Email: nbo@reportlinker.com

US: (805)652-2626

Intl: +1 805-652-2626


'/>"/>
SOURCE Reportlinker
Copyright©2010 PR Newswire.
All rights reserved

Related medicine technology :

1. Reportlinker Adds Global Cardiac Monitoring Systems Market -2013
2. Reportlinker Adds Medical Devices Market in Europe 2008-2012
3. Reportlinker Adds A Global Overview of Herbal/Traditional Products
4. Reportlinker Adds Methicillin-Resistant Staphylococcus Aureus (MRSA) Therapeutics - Pipeline Assessment and Market Forecasts to 2017
5. Reportlinker Adds Hepatitis A Preventive Vaccines - Pipeline Assessment and Market Forecasts to 2017
6. Reportlinker Adds Insulin Lispro - Comprehensive Patent Search
7. Reportlinker Adds EMR 2011: The Market for Electronic Medical Record Systems
8. Reportlinker Adds Advances in SPECT Imaging (Technical Insights)
9. Reportlinker Adds Cancer Vaccines - Pipeline Assessment and Market Forecasts to 2017
10. Reportlinker Adds Gene Therapy - Technologies, Markets and Companies
11. Reportlinker Adds The 2011 Top Ten Worlds Leading Pharmaceutical Companies
Post Your Comments:
*Name:
*Comment:
*Email:
(Date:2/8/2016)... Feb. 8, 2016  Unilife Corporation ("Unilife" or "Company") (NASDAQ: ... injectable drug delivery systems, today announced that it will release ... December 31, 2015 after market close on February 9, 2016. ... call to discuss these financial results.    About ... --> About Unilife Corporation ...
(Date:2/8/2016)... NORTHBROOK, Ill. , Feb. 8, 2016  Astellas Pharma ... today announced the promotion of James Robinson as ... the company,s operations in North and South America ... president, Astellas Pharma US, representing the commercial organization in ... assumed in 2013. Masao Yoshida , who ...
(Date:2/8/2016)... Palatin Technologies, Inc. (NYSE MKT: PTN), ... for the treatment of diseases with significant unmet ... the United States Patent and Trademark Office (USPTO) ... Patent Application Serial Number 14/313,258 (the ,258 application).  ... female sexual dysfunction using the formulation and dose ...
Breaking Medicine Technology:
(Date:2/8/2016)... ... ... Remember the old saying “rub some dirt on it”? Perhaps you should try ... Clay” the health benefits of integrating clay into a daily diet are numerous, as ... motivational speaker, Perry A~ has since dedicated her life to learning about the benefits ...
(Date:2/8/2016)... , ... February 08, 2016 , ... ... wide variety of organizations. DocuSyst provides a cloud hosted environment for FileHold ... installations include integration with various 3rd party applications using the FileHold web services ...
(Date:2/8/2016)... ... 2016 , ... GrassrootsHealth published data from its D*action public ... in the GrassrootsHealth cohort with substantially higher vitamin D levels than a cohort ... states Carole Baggerly, Director of GrassrootsHealth, “the safety and benefits of vitamin ...
(Date:2/8/2016)... (PRWEB) , ... February 08, 2016 , ... TopConsumerReviews.com recently ... in Mole removal products. , Moles are derived from a cluster of melanin when ... all the wrong places and create a lifetime of embarrassment. Historically, mole removal ...
(Date:2/8/2016)... ... , ... Guruji Mahendra Kumar Trivedi is offering 3 days of accelerated personal ... birthday on February 10th. During this time, people can achieve better health, greater ... people from over 40 different countries as an “ordinary man with an extraordinary gift.” ...
Breaking Medicine News(10 mins):