Rubicon Filter

• Filter is mounted on a standard 0.014'' guidewire
• Unique design and small crossing profile allows one-step insertion and deployment of both filter and stent
• Filter is deployed via a coaxial actuating wire at the proximal end of the guidewire
• Filter basket is supported by floating Nitinol struts for superior apposition in vessel
• 100 micron pore size is optimized for blood flow and capture efficiency
• Compatible with 6F guide catheters
• Large-bore catheter retrieval system is designed to minimize risk of debris loss during filter capture
• Unique retrieval system actuator with graphics shows physician the exact status of the filter as it is being captured

The filter is mounted on a steerable 0.014" guidewire, which is designed to be compatible with devices delivered with a 0.014" guidewire. The coaxial actuating wire design eliminates the need for a delivery catheter, allowing a stent to be pre-loaded on the filter wire and delivered in a one-step insertion of both devices. The free-floating struts have three radiopaque markers and are designed to provide consistent apposition to tortuous vasculature. The distal tip is highly radiopaque and shapeable. When the procedure is completed, the capture catheter is telescoped over the filter and trapped debris, and then withdrawn. The capture catheter has a large bore sleeve designed to contain the collapsed filter and the debris trapped within it. The actuating device includes graphics that show the clinician the status of the filter throughout the retrieval process.