Navigation Links
Park NX-Wafer for Wafer-Fab Manufacturing Fully Automates Semiconductor Industry’s Bare Wafer Automated Defect Review Process, Increases Throughput by 1,000 Percent
Date:7/15/2014

Santa Clara, CA (PRWEB) July 15, 2014

Park Systems, a leading manufacturer of atomic force microscopy (AFM) products announces Park NX-Wafer, a revolutionary AFM design for bare wafer manufacturing that fully automates the automatic defect review process and increases production throughput by an astounding 1,000%. Park NX-Wafer produces sub-Angstrom roughness measurements for the flattest substrates and wafers with tip-to-tip variation of less than 2%, for the first time ever in the entire history of the semiconductor industry. This fully automated defect review and identification system enables a critical inline process to classify defect types and source their origin through high resolution 3D imaging only available at Park Systems, the world’s leading AFM provider.

“Park NX-Wafer is an updated continuation from the wafer metrology product line, the Wafer Series, with new application capabilities focusing on automatic defect review (ADR), atomic force profiler, and sub-Angstrom surface roughness control. Among the three, SmartADR for 200/300mm bare wafers is a disruptive technology that improves productivity by up to 1,000% compared to traditional defect review methods by AFM,” explains Sang-il Park, CEO and Chairman Park Systems.“Designed specifically for the semiconductor industry, the new bare wafer ADR is the most advanced, fully automated defect review solution available, featuring advanced coordinate translation with enhanced vision that does not require any separate steps to calibrate the stage of the targeted defect inspection system nor labor intensive reference marking on the target wafer sample. Unlike SEM which leaves square-shaped destructive irradiation marks on defect sites after its run, the AFM-based defect review enables non-destructive 3D imaging of defects as small as a few nanometers."

NX-Wafer has several new features that help revolutionize the Wafer Fab Manufacturing process offering the improvements needed for full scale production of bare wafers. One is
a long range sliding stage that combines with NX-Wafer to become an Atomic Force Profiler (AFP). The new low noise AFP provides very flat profiling up to 50mm with profiling speed as fast as 1mm/sec for both local and global uniformity measurements including dishing, erosion, and edge-over-erosion (EOE) after chemical mechanical polishing (CMP). It guarantees accurate height measurements with no non-linear or high noise background subtraction over a wide range of profiling lengths.

Another new feature is the fully automated defect review process from transfer and alignment of defect maps to the survey and zoom-in scan imaging of defects on 200/300mm bare wafers. By utilizing Park’s proprietary coordinate translation technique using enhanced vision, the new bare wafer ADR can accurately transfer the defect maps obtained from a laser-scattering defect inspection tool to the Park NX-Wafer system. This technology does not require any separate step to calibrate the stage of the targeted defect inspection system and allows full automation for high throughput defect imaging.

“Park develops not only the most advanced atomic force microscopy system for wafer fab but also its own system software for automation. The extent of automation offered in our inline measurement and analysis are unprecedented and unparalleled. This makes Park NX-Wafer an automated AFM with true wafer-fab manufacturability. It is a genuine inline AFM system that works 24/7 for production or process engineers, not the other way around,” states Ryan (YK) Yoo, Vice President of Global Sales and Marketing Park Systems. “The Atomic Force Profiler (AFP) is an essential component of CMP metrology and Park NX-Wafer comes with a dedicated user interface for the automated CMP profiling and analysis, rendering complex background subtraction or calibration after each profiling measurement unnecessary. Both chip makers and wafer suppliers are demanding more accurate roughness control of ultra-flat surface on Si or SOI wafers, and Park NX-Wafer enables fully automated surface roughness measurement with sub-Angstrom repeatability and minimum tip-to-tip variation for either micro-roughness or long-range waviness."

Park NX-Wafer includes Park’s patented design features well-known throughout the industry to provide accuracy and durability including True Non-ContactTM mode and industry leading ultra-low noise Z detector.

Park will be showcasing NX-Wafer and their full line of atomic force microscopy (AFM) systems and nano technology tools used by the world’s leading semiconductor, academic and research facilities at Park Americas headquarters in Santa Clara, California. For private showing, please call (408) 986-1110 or email inquiry(at)parkafm(dot)com.

About Park Systems
Park Systems is a world-leading manufacturer of atomic force microscopy (AFM) systems with a complete range of products for researchers and industry engineers in chemistry, materials, physics, life sciences, and semiconductor and data storage industries. Park’s products are used by over a thousand institutions and corporations worldwide. Park’s AFM provides highest data accuracy at nanoscale resolution, superior productivity, and lowest operating cost thanks to its unique technology and innovative engineering. Park Systems, Inc. is headquartered in Santa Clara, California with its global manufacturing, and R&D headquarters in Korea. Park’s products are sold and supported worldwide with regional headquarters in the US, Korea, Japan, and Singapore, and distribution partners throughout Europe, Asia, and America. Please visit http://www.parkafm.com or call 408-986-1110 for more information.

Read the full story at http://www.prweb.com/releases/2014/07/prweb12014042.htm.


'/>"/>
Source: PRWeb
Copyright©2014 Vocus, Inc.
All rights reserved

Related medicine news :

1. Safer and more sustainable materials for manufacturing
2. Light fantastic -- Cable announces £3.6 million for manufacturing research
3. Key Joy West Expands their Business from Custom Cable Assembly to Custom Contract Manufacturing
4. Activated Carbon Manufacturing in the US Industry Market Research Report Now Available from IBISWorld
5. Global Pharmaceutical Contract Manufacturing Market
6. Global Pharmaceuticals & Medicine Manufacturing Industry Market Research Report from IBISWorld has Been Updated
7. Cosmetic & Beauty Products Manufacturing in the US Industry Market Research Report from IBISWorld Has Been Updated
8. Medical Instrument and Supply Manufacturing the US Industry Market Research Report from IBISWorld Has Been Updated
9. Prescription Acne Treatment Manufacturing in the US Industry Market Research Report from IBISWorld Has Been Updated
10. Enduro Expands with New Manufacturing Facility and Products
11. Pharma Contract Manufacturing: World Market Outlook 2013-2023
Post Your Comments:
*Name:
*Comment:
*Email:
(Date:8/19/2019)... ... August 19, 2019 , ... ProRehab Louisville and Dr. Stacie Grossfeld have ... and to access to top-notch sports medical care and sport injury experts for rehabilitation. ... demands of ice skating, knows the individualized treatment plan, and understands what a triple ...
(Date:8/19/2019)... ... 19, 2019 , ... Cosmetic Town, an online plastic surgery and information community ... in New York currently providing a lifetime of natural looking results for patients with ... hair. Cosmetic Town makes the process of finding information about these board-certified surgeons in ...
(Date:8/17/2019)... Fla. (PRWEB) , ... August 17, 2019 , ... ... Annual List of America’s Fastest-Growing Private Companies—the Inc. 5000 , For the 2nd ... 2098 With Three-Year Revenue Growth of 192% Percent , Inc. magazine today revealed ...
(Date:8/16/2019)... ... 16, 2019 , ... The clinical trial supply chain landscape is constantly shifting, ... Join Just In Time Manufacturing Solutions Manager at Almac Clinical Services , Natalie ... EDT (4pm BST/UK) on a journey through time as it relates to clinical trial ...
(Date:8/16/2019)... ... August 16, 2019 , ... Dr. Demetri ... the esteemed Haute Beauty Network. , The Haute Beauty Network, well known for ... Arnaoutakis as a hair restoration expert and our newest addition to the Haute ...
Breaking Medicine News(10 mins):
(Date:8/19/2019)... ... 18, 2019 , ... Laurence Fishburne is a revered actor who has many ... spans genres and generations. On television, he has also put his skills to use ... today's world and gives viewers information in a fair and balanced way. Featuring industry ...
(Date:8/19/2019)... ... 19, 2019 , ... The International Association of Eating Disorders ... the field of treatment for eating disorders, recommends membership for professionals who are ... a similar mission. , Founded in 1985, the iaedp™ Foundation is the ...
(Date:8/17/2019)... ... 2019 , ... Inc. Magazine Unveils Its Annual List of ... on the 2019 Inc. 5000 with Three-Year Revenue Growth of 157% Percent , ... is No. 2502 on its annual Inc. 5000 list, the most prestigious ranking ...
Breaking Medicine Technology: