Navigation Links
New type of solar structure cools buildings in full sunlight
Date:3/27/2013

Homes and buildings chilled without air conditioners. Car interiors that don't heat up in the summer sun. Tapping the frigid expanses of outer space to cool the planet. Science fiction, you say? Well, maybe not any more.

A team of researchers at Stanford has designed an entirely new form of cooling structure that cools even when the sun is shining. Such a structure could vastly improve the daylight cooling of buildings, cars and other structures by reflecting sunlight back into the chilly vacuum of space. Their paper describing the device was published March 5 in Nano Letters.

"People usually see space as a source of heat from the sun, but away from the sun outer space is really a cold, cold place," explained Shanhui Fan, professor of electrical engineering and the paper's senior author. "We've developed a new type of structure that reflects the vast majority of sunlight, while at the same time it sends heat into that coldness, which cools manmade structures even in the day time."

The trick, from an engineering standpoint, is two-fold. First, the reflector has to reflect as much of the sunlight as possible. Poor reflectors absorb too much sunlight, heating up in the process and defeating the purpose of cooling.

The second challenge is that the structure must efficiently radiate heat back into space. Thus, the structure must emit thermal radiation very efficiently within a specific wavelength range in which the atmosphere is nearly transparent. Outside this range, Earth's atmosphere simply reflects the light back down. Most people are familiar with this phenomenon. It's better known as the greenhouse effectthe cause of global climate change.

Two goals in one

The new structure accomplishes both goals. It is an effective a broadband mirror for solar lightit reflects most of the sunlight. It also emits thermal radiation very efficiently within the crucial wavelength range needed to escape Earth's atmosphere.

Radiative cooling at nighttime has been studied extensively as a mitigation strategy for climate change, yet peak demand for cooling occurs in the daytime.

"No one had yet been able to surmount the challenges of daytime radiative coolingof cooling when the sun is shining," said Eden Rephaeli, a doctoral candidate in Fan's lab and a co-first-author of the paper. "It's a big hurdle."

The Stanford team has succeeded where others have come up short by turning to nanostructured photonic materials. These materials can be engineered to enhance or suppress light reflection in certain wavelengths.

"We've taken a very different approach compared to previous efforts in this field," said Aaswath Raman, a doctoral candidate in Fan's lab and a co-first-author of the paper. "We combine the thermal emitter and solar reflector into one device, making it both higher performance and much more robust and practically relevant. In particular, we're very excited because this design makes viable both industrial-scale and off-grid applications."

Using engineered nanophotonic materials the team was able to strongly suppress how much heat-inducing sunlight the panel absorbs, while it radiates heat very efficiently in the key frequency range necessary to escape Earth's atmosphere. The material is made of quartz and silicon carbide, both very weak absorbers of sunlight.

Net cooling power

The new device is capable of achieving a net cooling power in excess of 100 watts per square meter. By comparison, today's standard 10-percent-efficient solar panels generate the about the same amount of power. That means Fan's radiative cooling panels could theoretically be substituted on rooftops where existing solar panels feed electricity to air conditioning systems needed to cool the building.

To put it a different way, a typical one-story, single-family house with just 10 percent of its roof covered by radiative cooling panels could offset 35 percent its entire air conditioning needs during the hottest hours of the summer.

Radiative cooling has another profound advantage over all other cooling strategy such as air-conditioner. It is a passive technology. It requires no energy. It has no moving parts. It is easy to maintain. You put it on the roof or the sides of buildings and it starts working immediately.

A changing vision of cooling

Beyond the commercial implications, Fan and his collaborators foresee a broad potential social impact. Much of the human population on Earth lives in sun-drenched regions huddled around the equator. Electrical demand to drive air conditioners is skyrocketing in these places, presenting an economic and an environmental challenge. These areas tend to be poor and the power necessary to drive cooling usually means fossil-fuel power plants that compound the greenhouse gas problem.

"In addition to these regions, we can foresee applications for radiative cooling in off-the-grid areas of the developing world where air conditioning is not even possible at this time. There are large numbers of people who could benefit from such systems," Fan said.


'/>"/>

Contact: Andrew Myers
admyers@stanford.edu
650-736-2245
Stanford School of Engineering
Source:Eurekalert

Related biology technology :

1. A light wave of innovation to advance solar energy
2. Discovery of a dark state could mean a brighter future for solar energy
3. Notre Dame researchers develop paint-on solar cells
4. In solar cells, tweaking the tiniest of parts yields big jump in efficiency
5. Tiny fractal trees for solar power
6. Taking solar technology up a notch
7. University of Florida physicists set new record for graphene solar cell efficiency
8. Solar nanowire array may increase percentage of suns frequencies available for energy conversion
9. Legendary Author And Screenwriter Nora Ephron Passes Away At 71; Solar Cigarette Pays Tribute To Such A Rare Talent
10. 2nd Generation Solar Cigarette Electronic Cigarette Provides Help Where Smokers Need it Most
11. University of Nottingham to play key role in European solar energy technology project
Post Your Comments:
*Name:
*Comment:
*Email:
(Date:10/11/2017)... and LAGUNA HILLS, Calif. , Oct. 11, ... Research, London (ICR) and University of ... SkylineDx,s prognostic tool to risk-stratify patients with multiple myeloma (MM), ... nine . The University of Leeds ... funded by Myeloma UK, and ICR will perform the testing ...
(Date:10/10/2017)... ... October 10, 2017 , ... ... pharmaceutical company advancing targeted antibody-drug conjugate (ADC) therapeutics, today confirmed licensing rights ... (Hybrid Polymerized Liposomal Nanoparticle), a technology developed in collaboration with Children’s Hospital ...
(Date:10/10/2017)... ... October 10, 2017 , ... USDM ... firm for the life sciences and healthcare industries, announces a presentation by Subbu ... , The presentation, “Automating GxP Validation for Agile Cloud Platforms,” will present a ...
(Date:10/9/2017)... ... October 09, 2017 , ... The Giving Tree Wellness ... targeting the needs of consumers who are incorporating medical marijuana into their wellness ... Arizona. , As operators of two successful Valley dispensaries, The Giving Tree’s two ...
Breaking Biology Technology:
(Date:4/11/2017)... 11, 2017 No two people are ... the New York University Tandon School of Engineering ... found that partial similarities between prints are common ... mobile phones and other electronic devices can be ... vulnerability lies in the fact that fingerprint-based authentication ...
(Date:4/5/2017)... -- The Allen Institute for Cell Science today announces the ... and dynamic digital window into the human cell. The ... of deep learning to create predictive models of cell ... growing suite of powerful tools. The Allen Cell Explorer ... available resources created and shared by the Allen Institute ...
(Date:4/4/2017)... 4, 2017   EyeLock LLC , a leader ... United States Patent and Trademark Office (USPTO) has issued ... linking of an iris image with a face image ... the company,s 45 th issued patent. ... timely given the multi-modal biometric capabilities that have recently ...
Breaking Biology News(10 mins):