Navigation Links
Nanogenerators grow strong enough to power small conventional electronics
Date:11/8/2010

Blinking numbers on a liquid-crystal display (LCD) often indicate that a device's clock needs resetting. But in the laboratory of Zhong Lin Wang at Georgia Tech, the blinking number on a small LCD signals the success of a five-year effort to power conventional electronic devices with nanoscale generators that harvest mechanical energy from the environment using an array of tiny nanowires.

In this case, the mechanical energy comes from compressing a nanogenerator between two fingers, but it could also come from a heartbeat, the pounding of a hiker's shoe on a trail, the rustling of a shirt, or the vibration of a heavy machine. While these nanogenerators will never produce large amounts of electricity for conventional purposes, they could be used to power nanoscale and microscale devices and even to recharge pacemakers or iPods.

Wang's nanogenerators rely on the piezoelectric effect seen in crystalline materials such as zinc oxide, in which an electric charge potential is created when structures made from the material are flexed or compressed. By capturing and combining the charges from millions of these nanoscale zinc oxide wires, Wang and his research team can produce as much as three volts and up to 300 nanoamps.

"By simplifying our design, making it more robust and integrating the contributions from many more nanowires, we have successfully boosted the output of our nanogenerator enough to drive devices such as commercial liquid-crystal displays, light-emitting diodes and laser diodes," said Wang, a Regents' professor in Georgia Tech's School of Materials Science and Engineering. "If we can sustain this rate of improvement, we will reach some true applications in healthcare devices, personal electronics, or environmental monitoring."

Recent improvements in the nanogenerators, including a simpler fabrication technique, were reported online last week in the journal Nano Letters. Earlier papers in the same journal and in Nature Communications reported other advances for the work, which has been supported by the Defense Advanced Research Projects Agency (DARPA), the U.S. Department of Energy, the U.S. Air Force, and the National Science Foundation.

"We are interested in very small devices that can be used in applications such as health care, environmental monitoring and personal electronics," said Wang. "How to power these devices is a critical issue."

The earliest zinc oxide nanogenerators used arrays of nanowires grown on a rigid substrate and topped with a metal electrode. Later versions embedded both ends of the nanowires in polymer and produced power by simple flexing. Regardless of the configuration, the devices required careful growth of the nanowire arrays and painstaking assembly.

In the latest paper, Wang and his group members Youfan Hu, Yan Zhang, Chen Xu, Guang Zhu and Zetang Li reported on much simpler fabrication techniques. First, they grew arrays of a new type of nanowire that has a conical shape. These wires were cut from their growth substrate and placed into an alcohol solution.

The solution containing the nanowires was then dripped onto a thin metal electrode and a sheet of flexible polymer film. After the alcohol was allowed to dry, another layer was created. Multiple nanowire/polymer layers were built up into a kind of composite, using a process that Wang believes could be scaled up to industrial production.

When flexed, these nanowire sandwiches which are about two centimeters by 1.5 centimeters generated enough power to drive a commercial display borrowed from a pocket calculator.

Wang says the nanogenerators are now close to producing enough current for a self-powered system that might monitor the environment for a toxic gas, for instance, then broadcast a warning. The system would include capacitors able to store up the small charges until enough power was available to send out a burst of data.

While even the current nanogenerator output remains below the level required for such devices as iPods or cardiac pacemakers, Wang believes those levels will be reached within three to five years. The current nanogenerator, he notes, is nearly 100 times more powerful than what his group had developed just a year ago.

Writing in a separate paper published in October in the journal Nature Communications, group members Sheng Xu, Benjamin J. Hansen and Wang reported on a new technique for fabricating piezoelectric nanowires from lead zirconate titanate also known as PZT. The material is already used industrially, but is difficult to grow because it requires temperatures of 650 degrees Celsius.

In the paper, Wang's team reported the first chemical epitaxial growth of vertically-aligned single-crystal nanowire arrays of PZT on a variety of conductive and non-conductive substrates. They used a process known as hydrothermal decomposition, which took place at just 230 degrees Celsius.

With a rectifying circuit to convert alternating current to direct current, the researchers used the PZT nanogenerators to power a commercial laser diode, demonstrating an alternative materials system for Wang's nanogenerator family. "This allows us the flexibility of choosing the best material and process for the given need, although the performance of PZT is not as good as zinc oxide for power generation," he explained.

And in another paper published in Nano Letters, Wang and group members Guang Zhu, Rusen Yang and Sihong Wang reported on yet another advance boosting nanogenerator output. Their approach, called "scalable sweeping printing," includes a two-step process of (1) transferring vertically-aligned zinc oxide nanowires to a polymer receiving substrate to form horizontal arrays and (2) applying parallel strip electrodes to connect all of the nanowires together.

Using a single layer of this structure, the researchers produced an open-circuit voltage of 2.03 volts and a peak output power density of approximately 11 milliwatts per cubic centimeter.

"From when we got started in 2005 until today, we have dramatically improved the output of our nanogenerators," Wang noted. "We are within the range of what's needed. If we can drive these small components, I believe we will be able to power small systems in the near future. In the next five years, I hope to see this move into application."


'/>"/>

Contact: John Toon
jtoon@gatech.edu
404-894-6986
Georgia Institute of Technology Research News
Source:Eurekalert  

Related biology technology :

1. Researchers use improved nanogenerators to power sensors based on zinc oxide nanowires
2. New fiber nanogenerators could lead to electric clothing
3. Nanogenerators produce electricity from running rodents and tapping fingers
4. Sigma-Aldrich (Nasdaq: SIAL) Reports Q3 2010 Diluted EPS of $0.76. Diluted EPS Increased by 9% and 19% on a Reported and Adjusted Basis, Respectively. Q3 Sales Performance Remains Strong; Full Year 2010 Diluted Adjusted EPS Outlook Raised to $3.20 -
5. Molecular Detections Detect-Ready™ MRSA Assay Demonstrates Strong Performance In Independent Comparative Study From Leading UK Hospital
6. Biotech Posts Strong Third Quarter Performance as Capital Markets Go on a Tear
7. China BCT Reports Strong Second Quarter 2010 Results
8. Gastrointestinal Disorders Therapeutics to 2016 - High Unmet Needs Triggering Strong Growth in Crohns Disease and Irritable Bowel Syndrome Markets Now Available at ReportsandReports
9. How strong is your booze?
10. DuPont Expects Strong 2010 Agriculture & Nutrition Sales Growth, Margin Expansion
11. Coherent, Inc. Reports Strong First Fiscal Quarter Results and Raises Annual Sales Guidance
Post Your Comments:
*Name:
*Comment:
*Email:
Related Image:
Nanogenerators grow strong enough to power small conventional electronics
(Date:5/25/2016)... ... , ... Lajollacooks4u has become a rising hotspot for specialized team building events ... attractions. Fortune 500 companies, such as Illumina, Hewlett-Packard, Qualcomm and Elsevier, have traveled ... , Each event kicks off with an olive oil and salt-tasting competition. From ...
(Date:5/25/2016)... (PRWEB) , ... May 25, 2016 , ... ... Michael Fitzmaurice recently became double board-certified in surgery and surgery of the hand ... Dr. Fitzmaurice is no stranger to going above and beyond in his pursuit ...
(Date:5/25/2016)... ... May 25, 2016 , ... WEDI, the nation’s leading authority ... announced that Charles W. Stellar has been named by the WEDI Board of Directors ... 2016. As an executive leader with more than 35 years of experience in healthcare, ...
(Date:5/24/2016)... ... May 24, 2016 , ... Cell therapies ... will be accelerated by research at Worcester Polytechnic Institute (WPI) that yielded a ... and tissue regeneration. , The novel method, developed by WPI faculty members Raymond ...
Breaking Biology Technology:
(Date:4/28/2016)... SAN FRANCISCO and BANGALORE, India ... part of EdgeVerve Systems, a product subsidiary of Infosys (NYSE: ... service provider, today announced a global partnership that ... convenient way to use mobile banking and payment services. ... Mobility is a key innovation area for financial services, but ...
(Date:4/19/2016)... -- The new GEZE SecuLogic access control ... system solution for all door components. It can be ... interface with integration authorization management system, and thus fulfills ... dimensions of the access control and the optimum integration ... considerable freedom of design with regard to the doors. ...
(Date:4/13/2016)... physicians supporting Medicaid patients in Central Florida ... telehealth thanks to a new partnership with higi.   ... can routinely track key health measurements, such as blood ... they opt in, share them with IMPOWER clinicians through ... location at no cost. By leveraging this data, IMPOWER ...
Breaking Biology News(10 mins):