Auburn, MA (PRWEB) July 18, 2013
PI (Physik Instrumente), a global leader in high precision motion control solutions, adds a lower-cost hexapod to its large family of parallel positioning devices. Hexapods produce motion in all 6 degrees of freedom i.e. XYZ as well as pitch, yaw and roll. The new H-820 was developed for applications that require multi-axis motion and high flexibility but do not need precision on a sub-micrometer level. PI’s new model caters to these needs with linear travel to 100 mm, rotary travel to 60°, load capacity of 20 kg, velocity of 20mm/sec, and resolution in the low micron range.
The hexapod is ideal for many applications including industrial automation and manufacturing, bio-technology research, or for micro-manipulation, the alignment and assembly of mechanical components, micromachining, satellite testing, sensor alignment, X-ray microscopy and medical engineering.
Specifications, Datasheet, and more Information:
Drawings, specifications and datasheets can be found at:
Why Parallel Kinematics?
The Hexapod is driven by six high-resolution actuators, all connected directly to one light-weight platform. This principle combines high system stiffness with a large clear aperture. Because of the low moving mass, small steps can be performed with significantly shorter settling times compared to stacked multi-axis positioners. Another advantage of this design is the randomized, user-programmable pivot point. In addition, there are no cable management issues and accumulation of runout and wobble errors such as with conventional stacked linear and rotary stages.
Controller and Software, and 20 Years of Experience
Copyright©2012 Vocus, Inc.
All rights reserved