Navigation Links
Breaking the final barrier: Room-temperature electrically powered nanolasers

TEMPE, Ariz. -- A breakthrough in nanolaser technology has been made by Arizona State University researchers.

Electrically powered nano-scale lasers have been able to operate effectively only in cold temperatures. Researchers in the field have been striving to enable them to perform reliably at room temperature, a step that would pave the way for their use in a variety of practical applications.

Details of how ASU researchers made that leap are published in a recent issue of the research journal Optics Express (Vol. 21, No. 4, 4728 2013). Read the full article at

The research team is led by Cun-Zheng Ning, an electrical engineering professor in the School of Electrical, Computer and Energy Engineering, one of ASU's Ira A Fulton Schools of Engineering.

He has been among engineers and scientists across the world attempting to fabricate a workable nanolaser with a volume smaller than its wavelength cubed an intermediate step toward further miniaturization of lasers.

Miniaturizing lasers is crucial to making electronics smaller and better, and enabling them to operate faster. Packing more lasers into smaller spaces is necessary for downsized devices to maintain high performance. Being able to integrate more lasers onto a small microchip would make the next generations of computers faster and smaller. The wavelength scale is the next milestone to be achieved in the overall effort to enable more miniaturization.

Ning explains that extremely small and thin lasers have been developed, but they needed to be optically driven by a larger laser. In addition, current electrically driven nanolasers can operate only at low temperatures or and emit light only in short bursts or pulses.

To enable them to be useful in practical applications particularly for improvements of electronic and photonic technologies it's necessary that the laser operates at room temperature without a refrigeration system, that it be powered by a simple battery instead of by another laser, and that it is able to emit light continuously.

"That has been the ultimate goal in the nanolaser research community," Ning says.

Ning's team started looking for solutions almost seven years ago, before he joined ASU, with his then- postdoctoral assistant, Alex Maslov, who is currently a scientist with Canon USA Inc.

While working for the National Aeronautics and Space Administration's Ames Research Center, they proposed a semiconductor wire coated with a silver shell. They showed that such a core-shell structure was able to shrink the nanolaser to an incredibly small scale.

About four years ago, working with Martin Hill, a former professor at Eindhoven University of Technology in the Netherlands, the team developed the thinnest nanolaser capable of operating at low temperatures. Two years ago, with the aid of Ning's student, Kang Ding, they were able to raise the operating temperature to 260 Kelvin (8.33 degrees Fahrenheit).

Significant impacts

More recently the team demonstrated a device that could operate at room temperature (read the article in the journal Physical Review B at, but the overheating led to imperfect device operation and a conclusive demonstration of lasing remained elusive.

The most recent results, however, demonstrated an eight-fold improvement over previous results from a year ago, finally providing an unambiguous demonstration of continuous electrically driven operation of a laser at room temperature, Ning says.

To explain the significance of such an advance, Ning says, "Imagine if computers had to be cooled down to minus 200 Celsius (minus 350 degrees Fahrenheit) for our current information technology to work. If that were the case, we would not have the widespread usage of computers and social media."

With nanolasers that can operate at room temperature and be powered by a simple battery, they can be used to make computers operate faster, significantly broaden Internet bandwidth, and provide light sources for many computer-chip-based sensing and detection technologies.

Show-stopping advance

But the benefits of achieving continuous room temperature operation go beyond the practical aspects, Ning says.

"In terms of fundamental science, it shows for the first time that metal heating loss is not an insurmountable barrier for room-temperature operation of a metallic cavity nanolaser under electrical injection. For a long time, many doubted if such operation is even possible at all," he says.

"Unlike nanolasers driven by another laser, where the driving laser can be chosen so that the heat generation is minimized, electrical injection by a battery produces more heat. In addition, typical metals can be heated quickly by the operation of the nanolasers. Thus, such elevated heat generation has been perceived as a show-stopper for such nanolasers," Ning says.

He adds: "More importantly, similar metal semiconductor structures used for nanolasers are also currently being explored for many other applications, such as being a building block for the formation of artificial materials that have remarkable properties. This demonstration is thus also important to the researchers working in those areas of materials science and engineering."

Crediting collaborators

The research has been supported by the Defense Advanced Project Agency (an agency of the U.S. Department of Defense), and by the Air Force Office of Scientific Research.

"Many experts questioned the feasibility of such a project and doubted if we would ever be able to make such a small laser, let alone one that worked at room temperature," he says. "But we were convinced of the novelty and significance of such a project. With the support and trust of these agencies, we were eventually able to achieve or exceed many of our initial goals. "

Ning says many challenges remain in efforts to integrate nanolasers into a photonic system on-chip platform, as well as to prolong the lifetime of laser operation, and to further develop the capabilities of such devices. In addition, the physical mechanisms involved in the interaction of photons with metallic structures on small scale are not yet fully understood, so there is still much research to be done in this area.

"But thanks to the realization of room-temperature operation of nanolasers, all these goals can start to be more effectively explored," Ning says.


Contact: Joe Kullman
Arizona State University

Related biology technology :

1. Chimerix Announces Late-Breaking Poster Presentation at Kidney Week 2011 Annual Meeting
2. 15-Minute Data From Phase 3 Study of Avanafil Featured as a Late Breaking Abstract at SMSNA Annual Meeting
3. Breaking Study: ICU Medicals Tego® Needlefree Connector Proves More Cost Effective Than Traditional Central Venous Catheter Locks
4. Groundbreaking National Program to Reverse Obesity Expands to 50 Locations
5. Functional Circulation LLC Receives Grand Challenges Explorations Grant for Groundbreaking Research in Global Health and Development
6. Biggest Names in Pharmaceutical, Healthcare Industry to Gather for Groundbreaking Event in Parsippany, New Jersey on September 11-12, 2012
7. Breaking the skin barrier
8. Frost & Sullivan Recognizes MicroProtein Technologies for its Path-Breaking Production Technology for Recombinant Proteins in Bacteria
9. New wave of technologies possible after ground-breaking analysis tool developed
10. Tel Aviv University to spearhead groundbreaking nanotechnology consortium
11. Citizen Scientists Successfully Fund Groundbreaking Startup to Sequence their Microbiomes
Post Your Comments:
(Date:6/27/2016)... ... June 27, 2016 , ... Newly created 4Sight Medical ... to the healthcare market. The company's primary focus is on new product introductions, ... strategies that are necessary to help companies efficiently bring their products to market. ...
(Date:6/27/2016)...  Liquid Biotech USA , ... Sponsored Research Agreement with The University of Pennsylvania ... cancer patients.  The funding will be used to ... clinical outcomes in cancer patients undergoing a variety ... employed to support the design of a therapeutic, ...
(Date:6/24/2016)... 2016  Regular discussions on a range of subjects including ... two entities said Poloz. Speaking at a lecture ... , he pointed to the country,s inflation target, which is ... "In certain areas there ... common economic goals, why not sit down and address strategy ...
(Date:6/24/2016)... ... 24, 2016 , ... While the majority of commercial spectrophotometers and fluorometers use ... 6000i models are higher end machines that use the more unconventional z-dimension of 20mm. ... from the bottom of the cuvette holder. , FireflySci has developed several Agilent ...
Breaking Biology Technology:
(Date:6/22/2016)... ANGELES , June 22, 2016 /PRNewswire/ ... identity management and verification solutions, has partnered ... edge software solutions for Visitor Management, Self-Service ... provides products that add functional enhancements ... partnership provides corporations and venues with an ...
(Date:6/20/2016)... 20, 2016 Securus Technologies, a leading ... for public safety, investigation, corrections and monitoring announced ... it has secured the final acceptance by all ... Managed Access Systems (MAS) installed. Furthermore, Securus will ... be installed by October, 2016. MAS distinguishes between ...
(Date:6/9/2016)... , June 9, 2016  Perkotek an innovation leader in attendance control systems is ... log work hours, for employers to make sure the right employees are actually signing ... ... ... ...
Breaking Biology News(10 mins):