Thermo Scientific IEC Centra-CL3 from Thermo Scientific

Quality Control Over Sample Preparation
The CL3 series will store and lock up to 99 protocols and has speed and accuracies to the nearest 50 rpm, select temperatures with 1C increments, as well as automatic speed calculation of the g-force. Laboratory technicians can be confident that the CL3 series will provide you a quality performance with accurate results. Capable of reaching 4C from 20C in ~7 minutes with rapid condition means you always spin at the required temperature.

Run-To-Run Replication
Thermo IECs exclusive At-Speed Timer mode is just one more convenience of the CL3 series. The timed portion of the run begins when sample load reaches set operating speed, providing you with the appropriate g-force effect on the sample for the desired time period.run after run.

Most Accommodating
The CL3 series accommodates up to 1 liter of sample (4 x 250 mL) accepting a wide variety of popular tubes including 15 mL, 50 mL, 225 mL conical, Vacutainer tubes to 15 mL (16 x 125 mm), microtubes, microplates (standard and deepwell), microscope slides, and an assortment of filtration devices.

Quick Release Rotor
The Thermo IEC 243 Swinging Bucket Rotor, utilizes convenient sealed Aerocarrier Adapters which accommodate sample volumes ranging from 0.25 mL to 250 mL. Exchanging rotors is a cinch with a simple, quick release/mounting mechanism. Additional savings may be realized because the CL3 series will accept rotors from various Thermo IEC centrifuges both past and present.

• Maintenance-free brushless motor.
• Quiet operation, less than 60 dBA (maximum).
• Quick acceleration and deceleration rates of 45 seconds.
• Low profile, only 12.5 (31.8 cm) from bench.
• Aerosol containment using new Aerocarrier Adapters.