Navigation Links
Lower-cost solar cells to be printed like newspaper, painted on rooftops
Date:8/24/2009

AUSTIN, Texas Solar cells could soon be produced more cheaply using nanoparticle "inks" that allow them to be printed like newspaper or painted onto the sides of buildings or rooftops to absorb electricity-producing sunlight.

Brian Korgel, a University of Texas at Austin chemical engineer, is hoping to cut costs to one-tenth of their current price by replacing the standard manufacturing process for solar cells gas-phase deposition in a vacuum chamber, which requires high temperatures and is relatively expensive.

"That's essentially what's needed to make solar-cell technology and photovoltaics widely adopted," Korgel said. "The sun provides a nearly unlimited energy resource, but existing solar energy harvesting technologies are prohibitively expensive and cannot compete with fossil fuels."

For the past two years, Korgel and his team have been working on this low-cost, nanomaterials solution to photovoltaics or solar cell manufacturing. Korgel is collaborating with professors Al Bard and Paul Barbara, both of the Department of Chemistry and Biochemistry, and Professor Ananth Dodabalapur of the Electrical and Computer Engineering Department. They recently showed proof-of-concept in an issue of Journal of the American Chemical Society.

The inks could be printed on a roll-to-roll printing process on a plastic substrate or stainless steel. And the prospect of being able to paint the "inks" onto a rooftop or building is not far-fetched.

"You'd have to paint the light-absorbing material and a few other layers as well," Korgel said. "This is one step in the direction towards paintable solar cells."

Korgel uses the light-absorbing nanomaterials, which are 10,000 times thinner than a strand of hair, because their microscopic size allows for new physical properties that can help enable higher-efficiency devices.

In 2002, he co-founded a company called Innovalight, based in California, which is producing inks using silicon as the basis. This time, Korgel and his team are using copper indium gallium selenide or CIGS, which is both cheaper and benign in terms of environmental impact.

"CIGS has some potential advantages over silicon," Korgel said. "It's a direct band gap semiconductor, which means that you need much less material to make a solar cell, and that's one of the biggest potential advantages."

His team has developed solar-cell prototypes with efficiencies at one percent; however, they need to be about 10 percent.

"If we get to 10 percent, then there's real potential for commercialization," Korgel said. "If it works, I think you could see it being used in three to five years."

He also said that the inks, which are semi-transparent, could help realize the prospect of having windows that double as solar cells. Korgel said his work has attracted the interest of industrial partners.


'/>"/>

Contact: Brian Korgel
Korgel@che.utexas.edu
512-471-5633
University of Texas at Austin
Source:Eurekalert  

Related biology news :

1. Flexible solar strips light up campus bus shelter
2. Accolade for solar-hydrogen project
3. DOE funds bio-inspired solar fuel center at Arizona State
4. Ben-Gurion University research and technology used in new solar energy farm
5. Tufts students host Earth Day with groundbreaking ceremony for solar house
6. Ancient diatoms lead to new technology for solar energy
7. Iowa Power Fund advances researcher’s long quest for efficient solar power
8. $300,000 donation from BP includes solar vehicle for UH
9. A world-first in solar technology unveiled at Concordia University
10. Solar-powered sea-slugs live like plants, prof says
11. Trustee makes donation to start new solar energy research center at Rensselaer
Post Your Comments:
*Name:
*Comment:
*Email:
Related Image:
Lower-cost solar cells to be printed like newspaper, painted on rooftops
(Date:11/29/2016)... Lithuania , Nov. 29, 2016 /PRNewswire/ ... biometric identification and object recognition technologies, today ... (SDK) for fingerprint recognition solutions that run ... a fingerprint template using less than 128KB ... in compact devices that have limited on-board ...
(Date:11/22/2016)... , Nov. 22, 2016   MedNet Solutions ... the entire spectrum of clinical research, is pleased to ... Medical LiveWire Healthcare and Life Sciences Awards as ... caps off an unprecedented year of recognition and growth ... for over 15 years. iMedNet ...
(Date:11/16/2016)... Calif. , Nov. 16, 2016 ... user experience and security for consumer electronics, and ... the financial and retail industry, today announced a ... and convenient way to authenticate users of mobile ... Sensory,s TrulySecure™ software which requires no ...
Breaking Biology News(10 mins):
(Date:12/9/2016)... ... December 09, 2016 , ... DuPont Industrial Biosciences ... the Breakthrough Solution of the Year Award from Platts Global Energy for ... The award was announced at the 18th Platts Global Energy Awards, held in ...
(Date:12/9/2016)... -- A platform of orthopedic device technologies developed by researchers ... to becoming viable options for repairing broken bones ... company from Philadelphia, PA. , ... absorbable bone fixation and regenerative repair technologies and ... company has leased space within the University City ...
(Date:12/9/2016)... 2016 According to a new market research ... Predesigned, Reagent Equipment), Application (Research, PCR, Gene, DNA, NGS, Diagnostic, RNAI), ... MarketsandMarkets, the global market is expected to reach USD 2.20 Billion ... of 10.6% during the forecast period. ... ...
(Date:12/8/2016)... ... , ... Lajollacooks4u, San Diego’s premier team building events and cooking events company, ... offerings and company expansion. , This is largely due to its team ... 30 people. Ever since, Lajollacooks4u has seen significant demand for its services from organizations ...
Breaking Biology Technology: